(1)725.jpg)
(2)464.jpg)
(3)969.jpg)
(4)920.jpg)
IPE BEAMS EUROPEAN STANDARD UNIVERSAL I BEAMS (I SECTION)
Application characteristics of I Beam
Whether I Beam is ordinary or light, because the section size is relatively high and narrow, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for the members bent in the plane of their web or form lattice stress members. It is not suitable for axial compression members or members with bending perpendicular to the plane of the web, which makes it very limited in the scope of application. I-beam is widely used in buildings or other metal structures.
Due to the relatively high and narrow section size of ordinary I-beam and light I-beam, the moment of inertia of the two main axes of the section is quite different, which makes it very limited in the scope of application. The use of I-beam shall be selected according to the requirements of design drawings.
In the structural design, the selection of I-beam should be based on its mechanical properties, chemical properties, weldability, structural size, etc.
(2)171394.jpg "IPE-BEAMS-EUROPEAN-STANDARD-UNIVERSAL-I-BEAMS-(I-SECTION)(2)171394.jpg")
IPE BEAMS. EUROPEAN STANDARD UNIVERSAL I BEAMS (I SECTION) WITH PARALLEL FLANGES. DIMENSIONS, SPECIFICATIONS, ACCORDANCE WITH FORMER STANDARD EU 19-57
Manufactured according to standards :
DIN 1025
Euronorm 19-57 (Dimension)
EN 10034: 1993 (Tolerances)
EN 10163-3, C (Surface conditions)
STN 42 5550
ČSN 42 5550
TDP: STN 42 0135
IPN (INP) BEAMS. EUROPEAN STANDARD UNIVERSAL STEEL I BEAMS (IPN SECTION) FLANGE SLOPE 14 %. PROPERTIES, DIMENSIONS, SPECIFICATIONS, DIN 1025-1: 1995
Current table represents European standard I sections, IPN (INP) beams flange slope 14%, specifications, properties, dimensions.
Manufactured according to standards :
DIN 1025-1: 1995
EN 10024: 1995 (Tolerances)
EN 10163-3: 2004 (Surface conditions)
STN 42 5550
ČTN 42 5550
TDP: STN 42 0135
(5)621458.png "IPE-BEAMS-EUROPEAN-STANDARD-UNIVERSAL-I-BEAMS-(I-SECTION)(5)621458.png")
Drawing of I Beam
Size and theoratical weight chart of I Beam:
Model | Size | Theoretical weight |
10# | 100*63*4.5 | 11.261 |
12# | 120*74*5.0 | 13.987 |
14# | 140*80*5.5 | 16.89 |
16# | 160*88*6.0 | 20.513 |
18# | 180*94*6.5 | 24.143 |
20#A | 200*100*7.0 | 27.929 |
20#B | 200*102*9.0 | 31.069 |
22#A | 220*110*7.5 | 33.07 |
22#B | 220*112*9.5 | 36.542 |
25#A | 250*116*8.0 | 38.105 |
25#B | 250*118*10.0 | 42.03 |
28#A | 280*122*8.5 | 43.492 |
28#B | 280*124*10.5 | 47.888 |
30#A | 300*126*9.0 | 48.084 |
30#B | 300*128*11.0 | 52.794 |
30#C | 300*130*13 | 57.504 |
32#A | 320*130*9.5 | 52.717 |
32#B | 320*132*11.5 | 57.741 |
32#C | 320*134*13.5 | 62.765 |
36#A | 360*136*10.0 | 60.037 |
36#B | 360*138*12.0 | 65.689 |
36#C | 360*140*14 | 71.341 |
40#A | 400*142*10.5 | 67.598 |
40#B | 400*144*12.5 | 73.878 |
40#C | 400*146*14.5 | 80.158 |
45#A | 450*150*11.5 | 80.42 |
45#B | 450*152*13.5 | 87.485 |
45#C | 450*154*15.5 | 94.55 |
56#A | 560*166*12.5 | 106.316 |
56#B | 560*168*14.5 | 115.108 |
56#C | 560*170*16.5 | 123.9 |
63#A | 630*176*13 | 121.407 |
63#B | 630*178*15 | 131.298 |
63#C | 630*180*17 | 141.189 |